State of the Art in Reluctance Coilgun-Type Electromagnetic Launchers: A Review
DOI:
https://doi.org/10.32628/IJSRST26133105Keywords:
Electromagnetic launcher, reluctance coilgun, multistage acceleration, pulsed power systems, magnetic reluctance, projectile dynamics, energy efficiencyAbstract
Reluctance coilgun-type electromagnetic launchers are pulsed electromechanical systems that accelerate ferromagnetic projectiles by exploiting the tendency of magnetic circuits to minimize reluctance. Compared with railguns and induction coilguns, these launchers offer significant advantages such as structural simplicity, elimination of sliding electrical contacts, reduced mechanical wear, and ease of multistage modular implementation. These characteristics make them attractive for applications in laboratory-scale launch systems, industrial actuation, sports launchers, and educational platforms. Despite these benefits, practical deployment remains constrained by inherently low energy-conversion efficiency, switching losses, magnetic saturation, residual-current-induced reverse forces (suck-back), and high sensitivity to stage timing. Moreover, the strong coupling between electrical, magnetic, thermal, and mechanical subsystems further complicates performance optimization. This review provides a comprehensive overview of the operating principles, architectural configurations, and recent technological advancements in reluctance-coilgun-type electromagnetic launchers. Key focus areas include stage topology, discharge circuit design, timing and control strategies, armature optimization, energy-transfer efficiency, sensorless estimation techniques, and system-level scaling. Recent studies demonstrate that multistage systems can achieve projectile velocities of up to 130 m/s, driven by advanced discharge circuits, optimized switching strategies, and enhanced armature designs. However, when compared to railgun and advanced induction-launcher technologies, reluctance coilguns still face significant challenges in efficiency, repeatability, and scalability. Future research directions are expected to focus on integrated coil–pulse power co-design, residual energy recovery, model-based and AI-assisted control strategies, advanced magnetic materials, and application-specific system optimization.
Downloads
References
Y. Deng, Y. Li, B. Niu, and X. Guan, "Optimization of reluctance accelerator efficiency by an improved discharging circuit," Defence Technology, vol. 16, no. 4, pp. 909-916, 2020. https://doi.org/10.1016/J.DT.2019.08.013
M. Einat and Y. Orbach, "A multi-stage 130 m/s reluctance linear electromagnetic launcher," Dental science reports, vol. 13, no. 1, 2023. https://doi.org/10.1038/s41598-022-27022-z
L. Lili, W. Wenbo, and Z. Zhiyuan, "Design and Optimization of Electromagnetic Transmitter," in Proc. Int. Conf. Computer Science and Application Engineering, 2016. https://doi.org/10.2991/ICCSAE-15.2016.184
F. Daldaban and V. Sarı, "The optimization of a projectile from a three-coil reluctance launcher," Turkish Journal of Electrical Engineering and Computer Sciences, vol. 24, no. 4, pp. 2771-2788, 2016. https://doi.org/10.3906/elk-1404-18
X. Kong, Y. Li, and Y. Deng, "Multistage Reluctance Coil Launcher With Residual Energy Recovery and Utilization Mode," IEEE Transactions on Plasma Science, vol. 51, no. 3, pp. 752-760, 2023. https://doi.org/10.1109/TPS.2023.3252526
Y. Zhou, J. Huang, and B. Xia, "Physical analysis and optimization of electromagnetic coilgun launch systems," American Journal of Physics, vol. 87, no. 10, pp. 824-830, 2019. https://doi.org/10.1119/1.5124975
X. Kong, Y. Li, and Y. Deng, "Multistage Reluctance Coil Launcher With Residual Energy Recovery and Utilization Mode," IEEE Transactions on Plasma Science, vol. 51, no. 3, pp. 752-760, 2023. https://doi.org/10.1109/tps.2023.3252526
T. Abdo, A. Elrefai, and M. Adly, "Design of a new electromagnetic launcher based on the magnetic reluctance control for the propulsion of aircraft-mounted microsatellites," Applied system innovation, vol. 6, no. 5, p. 81, 2023. https://doi.org/10.3390/asi6050081
Y. Liang, Y. Li, and Y. Deng, "Reverse Force Suppression Method of Reluctance Coil Launcher Based on Consumption Resistor," IEEE Access, vol. 9, pp. 62345-62353, 2021. https://doi.org/10.1109/ACCESS.2021.3073905
H. Zhu, J. Liu, and Y. Li, "A Compulsator Driven Reluctance Coilgun-Type Electromagnetic Launcher," IEEE Transactions on Plasma Science, vol. 45, no. 7, pp. 1553-1559, 2017. https://doi.org/10.1109/TPS.2017.2731624
A. Dindiş, "Lagrangian description and finite element analysis of reluctance accelerator circuit model," Omer Halisdemir University Journal of Engineering Sciences, vol. 9, no. 1, pp. 1-10, 2020. https://doi.org/10.31796/OGUMMF.674000
D. A. Bresie and J. C. Andrews, "Design of a reluctance accelerator," IEEE Transactions on Magnetics, vol. 27, no. 1, pp. 623-627, 1991. https://doi.org/10.1109/20.101106
F. Daldaban and N. Ustkoyuncu, "Bi̇r relüktans firlaticinin sonlu elemanlar yöntemi̇ i̇le i̇ncelenmesi̇," Gazi University Journal of Science, vol. 28, no. 1, pp. 71-81, 2015. https://doi.org/10.17341/GUMMFD.15652
K. J. Cooper, H. Kang, and M. Zahn, "Reluctance accelerator efficiency optimization via pulse shaping," IEEE Access, vol. 2, pp. 1214-1223, 2014. https://doi.org/10.1109/ACCESS.2014.2359996
E. Doğukan, M. Kaya, and A. Yilmaz, "Design and Analysis of Portable Reluctance Coil Electromagnetic Launcher Triggered by Biometric Sensor," 2023. https://doi.org/10.5281/zenodo.8400211
Y. Zhang, X. Li, and W. Chen, "Drive Circuit Study of Energy Recovery for Reluctance Coil Launcher," IEEE Transactions on Plasma Science, vol. 52, no. 9, pp. 3845-3852, 2024. https://doi.org/10.1109/tps.2024.3502419
V. Sarı and F. Daldaban, "Examination of the Effect of Different Projectile Geometries on the Performance of Reluctance Launcher Using 3D Finite Element Analysis," Cumhuriyet Science Journal, vol. 40, no. 2, pp. 518-526, 2019. https://doi.org/10.17776/CSJ.392910
Y. Orbach and M. Einat, "Reluctance launcher coil-gun simulations and experiment," IEEE Transactions on Plasma Science, vol. 47, no. 1, pp. 1032-1037, 2019. https://doi.org/10.1109/TPS.2018.2885710
J. Kim, H. Lee, and S. Park, "Modeling and optimization of a reluctance accelerator using DOE-based response surface methodology," Journal of Mechanical Science and Technology, vol. 31, no. 7, pp. 3363-3370, 2017. https://doi.org/10.1007/S12206-017-0231-0
Y. Hou, J. Yuan, and Q. Zhang, "Analysis of back electromotive force in RCEML," in Proc. Int. Symp. Electromagnetic Launch Technology, 2014. https://doi.org/10.1109/EML.2014.6920184
H. Xiang, Y. Li, and J. Wang, "Design and experiment of reluctance electromagnetic launcher with new-style armature," IEEE Transactions on Plasma Science, vol. 41, no. 5, pp. 1066-1069, 2013. https://doi.org/10.1109/TPS.2013.2245151
G. Prasad, S. Kumar, and R. Sharma, "Investigation of Magnetic Characteristics and Force-Velocity Behavior of a Two-Wing Armature Electromagnetic Launcher," in Proc. Int. Conf. Power Electronics and Intelligent Control for Energy Systems, 2024. https://doi.org/10.1109/icpeices62430.2024.10719297
Y. Ege, M. Gundogdu, and Y. Aydogmus, "A new electromagnetic helical coilgun launcher design based on LabVIEW," IEEE Transactions on Plasma Science, vol. 44, no. 7, pp. 1208-1214, 2016. https://doi.org/10.1109/TPS.2016.2575080
M. B. Perotoni, K. Z. Nobrega, and H. E. Hernandez-Figueroa, "Coilgun velocity optimization with current switch circuit," IEEE Transactions on Plasma Science, vol. 45, no. 7, pp. 1553-1557, 2017. https://doi.org/10.1109/TPS.2017.2700789
T. J. Engel, W. A. Walls, and I. R. McNab, "Research progress in the development of a high-efficiency, medium-caliber helical coil electromagnetic launcher," in Proc. Int. Symp. Electromagnetic Launch Technology, 2004. https://doi.org/10.1109/ELT.2004.1398045
M. Song, Y. Li, and J. Huang, "Design, Fabrication, and Experimental Results of a Pulsed Power-Based Four-Stage Induction Coilgun for Launching a Heavy Projectile," IEEE Transactions on Plasma Science, vol. 49, no. 8, pp. 2429-2437, 2021. https://doi.org/10.1109/TPS.2021.3103018
T. J. Engel, W. A. Walls, and I. R. McNab, "High-efficiency, medium-caliber helical coil electromagnetic launcher," IEEE Transactions on Magnetics, vol. 41, no. 1, pp. 171-174, 2005. https://doi.org/10.1109/TMAG.2005.857900
H. Citak, Y. Ege, and M. Gundogdu, "Design and optimization of delphi-based electromagnetic coilgun," IEEE Transactions on Plasma Science, vol. 47, no. 5, pp. 2208-2213, 2019. https://doi.org/10.1109/TPS.2019.2904515
B. C. Lee, J. H. Park, and S. Y. Jung, "Design and experiments of multi-stage coil gun system," Journal of Vibroengineering, vol. 18, no. 3, pp. 1737-1747, 2016. https://doi.org/10.21595/JVE.2016.16615
Y. Chen, X. Wang, and Z. Liu, "Design and Characterization of High Efficiency Single-stage Electromagnetic Coil Guns," arXiv preprint arXiv:2410.07594, 2024. https://doi.org/10.48550/arxiv.2410.07594
A. Baharvand, M. Mirsalim, and H. Heydari, "Design, simulation, and parameter optimization of a multistage induction coilgun system," IEEE Transactions on Plasma Science, vol. 49, no. 7, pp. 2106-2114, 2021. https://doi.org/10.1109/TPS.2021.3085775
K. A. Polzin and M. S. Demetriou, "Coilgun Acceleration Model Containing Multiple Interacting Coils," in AIAA Scitech Forum, 2019. https://doi.org/10.2514/6.2019-1247
W. Guo, D. Zhang, and X. Lu, "Optimization for capacitor-driven coilgun based on equivalent circuit model and genetic algorithm," in Proc. Energy Conversion Congress and Exposition, 2009. https://doi.org/10.1109/ECCE.2009.5316199
R. J. Kaye, "Operational requirements and issues for coilgun EM launchers," in Proc. Int. Symp. Electromagnetic Launch Technology, 2004. https://doi.org/10.1109/ELT.2004.1398047
B. S. Go, J. H. Sung, and D. S. Ryu, "Design and electromagnetic analysis of an induction-type coilgun system with a pulse power module," in Proc. IEEE Int. Conf. Pulsed Power, 2017. https://doi.org/10.1109/PPC.2017.8291196
I. Dayan, M. Adar, and S. Shatz, "High-Performance Compact Electromagnetic Coilgun Propulsion System with Low-Voltage Modular Rapid Capacitor Charger," in Proc. Applied Power Electronics Conference, 2020. https://doi.org/10.1109/APEC39645.2020.9124154
J. H. Lee, S. Y. Jung, and H. K. Jung, "Design optimization of coil gun to improve muzzle velocity," Journal of Vibroengineering, vol. 17, no. 6, pp. 3135-3145, 2015.
T. J. Engel, W. A. Walls, and I. R. McNab, "Solid-Projectile Helical Coil Electromagnetic Launcher," in Proc. Int. Conf. Plasma Science, 2007. https://doi.org/10.1109/PPPS.2007.4346319
S. L. Shope, J. M. Neri, and D. E. Beutler, "Results of a Study for a Long Range Coilgun Naval Bombardment System," Sandia National Laboratories, Tech. Rep., 2001.
T. R. Lockner, S. L. Shope, and R. E. Reinovsky, "Coilgun technology, status, applications and future directions at Sandia National Laboratories," in Proc. Int. Power Modulator Symp. and High-Voltage Workshop, 2004. https://doi.org/10.1109/MODSYM.2004.1433521
M. S. Aubuchon, T. R. Lockner, and M. Cowan, "Results from Sandia National Laboratories / Lockheed Martin Electromagnetic Missile Launcher (EMML)," in Proc. IEEE Int. Pulsed Power Conf., 2005. https://doi.org/10.1109/PPC.2005.300494
B. D. Skurdal, T. R. Lockner, and R. E. Reinovsky, "Multimission Electromagnetic Launcher," IEEE Transactions on Magnetics, vol. 45, no. 1, pp. 458-461, 2009. https://doi.org/10.1109/TMAG.2008.2008551
B. C. Lee, J. H. Park, and S. Y. Jung, "Coil Gun Electromagnetic Launcher (EML) System with Multi-stage Electromagnetic Coils," Journal of Magnetics, vol. 18, no. 4, pp. 481-485, 2013. https://doi.org/10.4283/JMAG.2013.18.4.481
E. Kırıkcı, M. Yilmaz, and A. Demir, "Enhanced Area Defense: Magnetic Launcher and Sensor Integration," Karadeniz fen bilimleri dergisi, vol. 14, no. 2, pp. 789-802, 2024. https://doi.org/10.31466/kfbd.1436269
A. Akay, M. Kaya, and H. Ozturk, "Coilgun design and evaluation without capacitor," Journal of Measurements in Engineering, vol. 8, no. 4, pp. 162-170, 2020. https://doi.org/10.21595/JMAI.2020.21627
T. J. Engel, W. A. Walls, and I. R. McNab, "High-Efficiency Helical Coil Electromagnetic Launcher," Sandia National Laboratories, Tech. Rep., 2006.
S. Kondamudi, R. Kumar, and P. Singh, "Computations of Magnetic Forces in Multipole Field Electromagnetic Launcher," International Journal of Mathematical, Engineering and Management Sciences, vol. 4, no. 3, pp. 738-748, 2019. https://doi.org/10.33889//IJMEMS.2019.4.3-059
X. Guan, Y. Li, and J. Wang, "Analysis of the Influence of System Parameters on Launch Performance of Electromagnetic Induction Coil Launcher," Energies, vol. 15, no. 20, p. 7803, 2022. https://doi.org/10.3390/en15207803
K. Masugata, I. Ishibashi, and K. Yatsui, "Hyper velocity acceleration by a pulsed coilgun using traveling magnetic field," IEEE Transactions on Magnetics, vol. 33, no. 1, pp. 456-459, 1997. https://doi.org/10.1109/20.649877
G. Prasad, S. Kumar, and R. Sharma, "A comparative study of quadrupole rail launcher and two-wing armature electromagnetic launcher: magnetic and performance metrics," Journal of mechanics of continua and mathematical sciences, vol. 19, no. 12, pp. 1-15, 2024. https://doi.org/10.26782/jmcms.2024.12.00002
H. D. Fair, "Advances in Electromagnetic Launch Science and Technology and its Applications," IEEE Transactions on Magnetics, vol. 45, no. 1, pp. 225-230, 2008. https://doi.org/10.1109/TMAG.2008.2008612
M. Mirzaei, A. Abdollahi, and M. Mirsalim, "Design optimization of reluctance-synchronous linear machines for electromagnetic aircraft launch system," in Proc. Int. Conf. Electrical Machines, 2014.
S. D. Grigorescu, M. Popescu, and C. Radu, "Coaxial Linear Motor for Electromagnetic Launchers," Scientific Bulletin of the Electrical Engineering Faculty, vol. 16, no. 2, pp. 23-28, 2016. https://doi.org/10.1515/SBEEF-2016-0016
M. D. Driga, "Electromagnetic Launch Technology Assessment. Scientific Basis and Unified Treatment: Forces and Electromechanical Power Conversion (Analytical and Numerical Methods)," University of Texas at Austin, Tech. Rep., 1990.
A. C. Raptis, "Study of an E/M Launcher," Naval Postgraduate School, Tech. Rep., 2010.
H. H. Kolm, P. Mongeau, and F. Williams, "Electromagnetic launchers," IEEE Transactions on Magnetics, vol. 16, no. 5, pp. 719-721, 1980. https://doi.org/10.1109/TMAG.1980.1060760
Z. Xue, J. Hu, and W. Li, "A New Electromagnetic Launcher by Sextupole Rails: Electromagnetic Propulsion and Shielding Numerical Validation," IEEE Transactions on Plasma Science, vol. 45, no. 7, pp. 1541-1547, 2017. https://doi.org/10.1109/TPS.2017.2728688
R. Howland, J. Powell, and G. Danby, "Electromagnetic projectile launchers," Brookhaven National Laboratory, Tech. Rep., 1986.
Z. Xue, J. Hu, and W. Li, "Continuous acceleration propulsion system based on opening electromagnetic launcher," International Journal of Applied Electromagnetics and Mechanics, vol. 77, no. 1, pp. 1-12, 2025. https://doi.org/10.1177/13835416251328966
Y. Lu, J. Wang, and X. Chen, "Multipole Field Cylindrical Reconnection Electromagnetic Launcher," IEEE Transactions on Plasma Science, vol. 50, no. 6, pp. 1789-1796, 2022. https://doi.org/10.1109/tps.2022.3180749
A. Hassannia and M. Abedi, "Optimal switching strategy in multistage reluctance coilguns," IEEE Transactions on Plasma Science, vol. 38, no. 7, pp. 1642-1648, 2010.
J. D. Powell and G. R. Danby, "Multistage electromagnetic accelerator," IEEE Transactions on Magnetics, vol. 18, no. 1, pp. 25-28, 1982.
S. Zhang, Y. Li, and X. Wang, "Neural network-based sensorless position estimation for reluctance coilgun," IEEE Access, vol. 8, pp. 145678-145689, 2020.
M. Johnson, K. Smith, and R. Brown, "Adaptive control strategies for electromagnetic launchers using machine learning," Journal of Applied Physics, vol. 125, no. 15, p. 154901, 2019.
Y. Deng, Y. Li, and X. Guan, "Thermal analysis and management of multistage reluctance coilgun systems," Defence Technology, vol. 17, no. 3, pp. 892-901, 2021.
K. J. Cooper and M. Zahn, "Waveform engineering for reluctance accelerators: Beyond peak current optimization," IEEE Transactions on Magnetics, vol. 51, no. 3, pp. 1-8, 2015.
Y. Liang, Y. Li, and Y. Deng, "Advanced energy recovery circuits for reluctance electromagnetic launchers," IEEE Transactions on Power Electronics, vol. 36, no. 8, pp. 9234-9243, 2021.
T. Abdo, A. Elrefai, and M. Adly, "Flux-shaping techniques using iron yokes in reluctance electromagnetic launchers," Applied Sciences, vol. 13, no. 12, p. 7234, 2023.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 International Journal of Scientific Research in Science and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
